wet biomass material dryer

wet biomass material dryer: 1,reasonable structure 2,high dry capacity 3,smooth rotation 4,low energy consumption

wet biomass material dryer:

   

Belief introduction:

Usually sawdust is a kind of organics whose humidity is 40-50%, and required down to about 12% humidity after dried. And according to the sawdust features, aim to how to improve materials fill rate and the staying time in the cylinder, then full reformed. We adopt a new combined ,scatter the material device, multi cylinders structure, avoid the wind tunnel ,which make the sawdust fully transfer heat ,dehydrate; also add the pellets separating unit, greatly improved the heat efficiency, and improved the capacity.

Main characteristic:

1, Control automatically ,can guarantee the uniformity and stability of dried sawdust humidity.

2, Distinguish stone and metal automatically , can guarantee the impurities not into post-procedure .

3, Only need 1/6 of export equipments for the whole drying equipments.

4, Self insulation is up to 70% and more, (heat efficiency of traditional single cylinder is only 35%). It improved heat efficiency by at least 50%.

5, Adopt tail drive, more stable and reliable; completely avoid the phenomenon that roller drive often slip and influence the manufacture.

6, Reduce the area by 50% than single cylinder, reduce the building investment by 50%, reduce power consumption by 60%.

7, Lots of circle scatter materials combined distributing, efficiently control the drying time ,good drying effect.

8, Easily control the end moisture indexes.

9, Adopt frequency control of motor speed to control material throughput.

10,Low out temperature, long working time of dedusting equipments, can manufacture continuously to operate the post-procedure .

11, Equipped new energy saving hot stove, high efficient and energy saving, easy operation, coal consumption is reduced by 60%.

the packing:

  

Main technical parameters:

Model	Capacity(t/h)	Power(KW)	Remarks
WTBPD-50	0.5	18.5	For example , wet sawdust humidity: 40%, dry sawdust humidity :12%. Wood consumption : 128 kg per ton dry sawdust; power consumption: 17 degrees. When initial humidity change, the consumption also change.
WTBPD-100	1	25
WTBPD-150	1.5	39
WTBPD-200	2	45
WTBPD-250	2.5	70
WTBPD-300	3	80
WTBPD-400	4	95
WTBPD-500	5	120

Stove: usually  to reduce cost , we suggest hand firing hot stoveto supply heat.

wet biomass material dryer